XHViscosityController

BML20V viscosity controller

The viscosity controller systems are controlled by sensing viscosity through the loads placed on the diaphragm pump. The evaporation of solvent in the tank causes the liquid viscosity get high.And also the solvent adding will make the viscosity get low. As the liquid viscosity gets high,the loads on the pump is also increased,then the pump cycle is getting slow. As the liquid viscosity gets low,the loads on the pump is also decreased,then the pump cycle is getting fast.
The system of BML viscosity controllers is controlled by sensing viscosity through the loads placed on the diaphragm pump.

Description

BML20V viscosity controller

Viscosity controller for gravure printing

(Place of Origin: China)

XH-ViscosityControl

Used For

  • Roto-gravure printing and flexo printing: food package printing,plastic bag printing,PVC calico paper printing and all kinds of plastic package printing.
  • Laminating:food plastic package laminating,paper laminating and rubber laminating.
  • Coating:fit for bank card,negative,film,polaroid,car decorating and all kinds of substrate coating.
  • Other use: all kinds of industry which is required for liquid viscosity consistency

gravue-printing

Features:

  • Improves product’s quality and color consistency,reduse waster.
  • Saves labour and the worker can be focus on other printing problems.
  • Adds the solvent in time,30% ink can be saved.
  • Detecting ink viscosity makes use of the characteristics of diaphragm pump,not to be measured by torque sensor
  • Single unit performs 4 functions: Ink circulation, agitating, viscosity measurement and control
  • Easy to clean by only 2 liters of solvent, takes a few minutes.

Principle

  • The viscosity controller systems are controlled by sensing viscosity through the loads placed on the diaphragm pump. The evaporation of solvent in the tank causes the liquid viscosity get high.And also the solvent adding will make the viscosity get low. As the liquid viscosity gets high,the loads on the pump is also increased,then the pump cycle is getting slow. As the liquid viscosity gets low,the loads on the pump is also decreased,then the pump cycle is getting fast.

    The system of BML viscosity controllers is controlled by sensing viscosity through the loads placed on the diaphragm pump.

Viscocity_principle

Installation:

Direct Circulation

Sub Ink-tank Circulation

e-set-tyoku1e

e-set-kan1e

Sub Ink-tank Circulation

with using circulation pump

Sub ink-tank Circulation

with using circulation pump

for Roll Coater

e-set-jyun1e

e-set-roll1e

Sub Ink-tank Circulation for Ink chamber

e-set-cyan1e

Applicable any installation system with single unit

installation-VC

Model and Specification:

SPEC./MODELBML-10VBML-15VBML-20V
Circulation volume3.9L/min8.8 L/min19 L/min
Dimension760*350*280mm760*350*280mm780*380*300mm
Suction hose11*8mm*2m14*10mm*2.3m25*19mm*2.5m
Delivery hose10*6.5mm*2m11*8mm*2.3m25*16mm*2.5m
Air consumption40L/min90L/min160L/min
Control rangeNo.3:13-30sNo.3:13-30s /No.4:13-50sNo.4:13-50s
Control precision0.5s0.5s0.5s
Appearance304 Stainless Steel304 Stainless Steel304 Stainless Steel
Net weight19kg21 kg25 kg
Working pressure0.4Mpa0.5 Mpa0.6 Mpa
Working voltage220V220V220V
Max.volume of sub-tank20L40L80L

LEAVE A REPLY

Be the First to Comment!

Notify of
avatar
wpDiscuz